Victron Battery Monitor BMV702

New product

$373.99

-$134.00

$239.99tax incl.

Reduced price!



The Victron Battery monitor BMV-702 is a high precision battery monitor with a fuel gauge type of display with midpoint voltage monitoring technology (see below). The essential function of a battery monitor is to calculate ampere-hours consumed and the condition of the charge of the battery. Ampere-hours consumed are calculated by integrating the current flowing in or out of the battery.

One of the main advantages of the BMV702 is the ability to program up the unit to measure the voltage and temperature of a second battery.

The installation can be easily done by someone with electrical experience. All electrical connections go to the quick connect PCB on the current shunt. The shunt then connects to the the monitor with a standard RJ12 telephone cable. 

Midpoint Voltage Monitoring Technology:

This features is used in large complex battery systems which comes at a high cost, but the BMV700 has made this high tech feature much more economical.

Battery banks are designed with a series of connected cells, the midpoint voltage is the voltage halfway along this series. Practically the midpoint voltage should be half of the total voltage, however in reality this is never the case due to the various conditions of batteries, such as new batteries, different temperatures, internal leakage currents, various capacity and much more.

However this Midpoint Voltage Monitoring allows the system to detect a large or increasing change of the midpoint voltage which can activate an alarm to notify you that something is wrong with the battery system and therefore prevent having a major long term issue.

 

Included in the installation kit is a 10M RJ12 Cable, 2M Battery cable with fuse.

Standard features 
- Battery voltage, current, power, ampere-hours consumed and state of charge 
- Time to go at the current rate of discharge 
- Programmable visual and audible alarm 
- Programmable relay, to turn off non critical loads or to run a generator when needed. 
- 500 Amp quick connect shunt and connection kit 
- Shunt selection capability up to 10.000 Amps 
- VE.Direct communication port 
- Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health 
- Wide input voltage range: 9,5 – 95 V 
- High current measurement resolution: 10 mA (0,01A) 
- Low current consumption: 2,9 Ah per month (4 mA) @12V and 2,2 Ah per month (3mA) @ 24V

 

The Victron BMV702 Battery Monitor is a perfect addition to your electrical system for your Truck, Bus, Motorhome, RV or Boat.


*Requires Bluetooth Dongle and Mobile Device - neither included with BMV702

FeatureHigh current measurement resolution: 10 mA (0.01A)
FeatureWide input voltage range: 9.5 – 95 V
Power Consumption2.9 Ah per month (4 mA)
Warranty5 Yrs

Accessories

Customers who bought this product also bought:

9 other products in the same category: